General
HT panel KYN61 series withdrawable switchgear (hereinafter referred to as device) is manufactured by standard module through consulting MNS series low voltage switch cabinet of Switzerland ABB Company, and synthetically improved. The device is applicable to the system with AC 50Hz, rated working voltage 660V and below, used as control device for various power generation, transmission, distribution, power transfer and power consumption device. It is widely used in low voltage distribution system of various mining enterprise, tall building and hotel, municipal construction etc. Besides the general land use, after special disposal, it also can be used for marine petrol drill taken platform and nuclear power station. The device accords with international standard IEC439-1 and national standard GB7251.1.
Service environment
a)Air temperature : Maximum temperature: + 40'C ; Minimum temperatuer: -25C.
b)Humidity : Monthly average humidity 95%;Daily average humidity 90%.
c)Altitude above sea level : Maximum installation altitude : 2500m.
d)Ambient air not apparently polluted by corrosive and flammable gas,vapor etc.
e)No frequent violent shake.
Technical data
| Technology Parameters |
|
|
| Item |
Unit |
Parameters |
| Rated Working Voltage |
V |
400 |
| Rated Frequency |
Hz |
50/60 |
| Rated Current |
Horizontal bus line |
A |
1000-6300 |
| Vertical bus line |
A |
1000 |
| Rated short-time tolerant current(1s) |
kA |
100 |
| Rated peak tolerant current |
kA |
220 |
| Dielectric Strength |
V/1min |
2500 |
| Rated Insulation Voltage |
V |
AC660 |
| Effective installed height |
mm |
1800 |
| Drawer Specification |
400mm Height(16E) |
mm |
250A≤In≤630A |
| 200mm Height(8E) |
mm |
63A≤In≤250A |
| 200/2mm Height(8E/2) |
mm |
In≤63A |
| Control Motor Capacity |
kW |
300 |
| Out shell protection level |
|
IP30/IP40 |
| Shape dimension(Width×Length×Thickness) |
mm |
(400-1000)×1000×2200 |
Structure characteristics
The basic cabinet of device is combined assembly structure. Basic structural pieces of cabinet is zinc plated, connected and firmed into basic bracket through self tapping locking screw or 8.8 grade square corner screw. According to the change demand of project, additionally add corresponding gate, closing board, baffle plate, installation support and the components of bus bar, function units, to assemble a complete set of device. Perform modulus to interior component and compartment size (Modulus unit e=25mm).
Certification
Packing & Delivery
About us
Zhejiang Farady Powertech Co.,Ltd
Http:// faradypowertech.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}