++++General
FAS type gas insulated auto sectionalizer was used in 12kV,24kV,33kV rated
voltage, rated current 400/630A; 50/60HZ with the load current; over load
current of power line open circuit and opening and closing electric systems.
The switch can equipped with a controller with most advanced technical
parameter.
FAS type FAS is a intelligent type LBS for choice. It can automatically
disconnect when the distribution line was break down. It could operate by handle;
Implement electro motion and distant. The electric controller was installed in
stainless steel cabinet. So it could use in any conditions.
++++Service environment
a) Air temperature:
Maximum temperature: +40ºC; Minimum temperature:-20ºC
b) Humidity:
Monthly average humidity 95%; Daily average humidity 90% .
c) Altitude above sea level:
Maximum installation altitude: 2500m
d) Ambient air not apparently polluted by corrosive and flammable gas, vapor
etc.
e) No frequent violent shake
++++Feature
a) SF6 gas insulated : SF6 is a electric insulating gas of non-poison and
nonflammable, and have a good arc suppression feature.
b) Bushing diversity: Except for standard porcelain bushing, there are also
provide various rubber bushing.
c) Visible open circuit and opening and closing situation: It is easy to see the
color sign of the main contact place indicator ( green open circuit; red
closing). The indicator and main conductor always keep on direct
connecting, make sure show the conductor state.
d) Fast operation: Used by spring stored energy operation system., make sure
fast switch on and switch off operate ( no more than 1 second)
e) Could provide controller: Stocked by electric controller, could
operated in ground or operate by the main controller through RTU
screen
f) Solidity switch: Switch was made by solidity and anticorrosion material,
make sure have a long useful life (30 years) have the pole equipment
feature.
g) Standard: it will filled full SF6 before delivery, and deal with seal. Test
by IEC60265; GB3804.
++++ Main technical specifications
++++ Controller feature
Metering
• 128 Samples per cycle
• Galvanic isolation through Aux. CT & Aux. PT
• Secondary of 1000:1 CT ~ 12.5A, Up to 200% of rated voltage
• Currents(A,B,C,N), Voltages(A,B,C/R,S,T) : RMS, Phasors, Sequence
components, Harmonics
• Power : Apparent(kVA), Active(kW), Reactive(kVar), Power factor
• Energy : 4-quadrant metering, import / export active energy, inductive /
capacitive reactive energy.
• Frequency
• Demand Profile
• Report value by deadband
Status monitoring
• 10 Contacts input : Open, Closed, Lock, Gas low, Door open, etc.
- Opto-isolation
- Delay timers for de-bouncing of each contact input
- Configurable : Name, Interlock condition, Inverted status
• Controller status (battery & battery charger test result)
- External AC power loss
- Battery low, Battery Fail, Battery overvoltage, Battery Charger Fail,
Grounded battery
- Battery voltage
• Control Status
- Operator place : Local/Remote
- Control Lock
- Recloser On/Off, Protection On/Off, Ground Protection On/Off Function
Status
- Fault indicators, PQM status, Live Line(source, load side), Phase sync.,
Reclosing status
- Under voltage status, Under frequency status, Self-diagnostics status, etc.
- Analog Hi/Low alarm
++++ Packing & Transportation
++++ Contact
Zhejiang Farady Electric Co.,Ltd
TEL:0086-577-61722510/61777258
Fax:0086-577-61777257
Http://faradypowertech.en.made-in-china.com
Add:Xiangyang Industrial Zone,Liushi,Yueqing,Zhejiang,P.R.China, 325604
Audited Supplier 
){kind=link}
){kind=link}