Pole Mounted Load Break Switch

Breaking Capacity: Mv Load Breake Switch
Operation: Manual Type
Speed: Normal Type Circuit Breaker
Arc-extinguishing Medium: Vacuum
Installation: Pole Mounted
Structure: Sf6 Insulation
Customization:
Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
PGS type
Poles Number
3
Type
Circuit Breaker
Function
Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection)
Certification
ISO9001-2000, CCC
Transport Package
Seaworthy Wooden Case
Specification
sf6 insulation
Trademark
Farady
Origin
China (Mainland)
HS Code
8535210000
Production Capacity
10000 Per Year

Product Description

++++General
PGS type pole-install load switch was used in 12kV,24kV,33kV rated voltage, rated
current 400/630A; 50/60HZ with the load current; over load current of power line open
circuit and opening and closing electric systems.
The switch can equiped with a conttoller with most advanced technical parameter.
PGS-A type PGS is manaully LBS for choice.
PGS-M type PGS is a intelligent type LBS for choice. It can automatically disconnect
when the distribution line was break down. It could operated by handle; Implementt electro
motion and distant. The electric controller was installed in stainless steel cabinet. So it
could use in any conditions.
++++Service environment
a) Air temperature:
Maximum temperature: +40ºC; Minimum temperature:-20ºC
b) Humidity:
Monthly average humidity 95%; Daily average humidity 90% .
c) Altitude above sea level:
Maximum installation altitude: 2500m
d) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
e) No frequent violent shake
++++Feature
a) SF6 gas insulated : SF6 is a electric insulating gas of non-poison and nonflammable, and
have a good arc suppression feature.
b) Bushing diversity: Except for standard porcelain bushing, there are also provide various
rubber bushing.
c) Visible open circuit and opening and closing situation: It is easy to see the color sign of the
main contact place indicator ( green open circuit; red closing). The indicator and main
conductor always keep on direct connecting, make sure show the conductor state.
d) Fast operation: Used by spring stored energy operation system., make sure fast switch on
and switch off operate ( no more than 1 second)
e) Could provide controller: Stocked by electric controller, could operated in
ground or operate by the main controller through RTU screen
f) Solidity switch: Switch was made by solidity and anticorrosion material, make sure have a
long useful life (30 years) have the pole equipment feature.
g) Standard: it will filled full SF6 before delivery, and deal with seal. Test by IEC60265;
GB3804.
++++ Main technical specifications
 
Pole Mounted Load Break Switch
 

++++ Packing & Transportation

Pole Mounted Load Break Switch

Contact

Zhejiang Farady Electric Co.,Ltd

TEL:0086-577-61722510/61777258

Fax:0086-577-61777257

Http://faradypowertech.en.made-in-china.com

Add:Xiangyang Industrial Zone,Liushi,Yueqing,Zhejiang,P.R.China, 325604

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory
Registered Capital
7.67 Million USD
Plant Area
3775 square meters