++++General
With the strong assistance of our adept professionals, we are engrossed in supplying a
large variety of Feeder Pillar Panel. The offered panel is Integrated with power
distribution/metering/protection/control/reactive power compensation function. This
panel is extensively used in commercial and residential sectors for low voltage
distribution applications. Before offering to the clients, this panel is stringently tested in
order to ensure its flawless performance. Comply with standard IEC439
++++Service environment
a) Air temperature: Maximum temperature: +40ºC; Minimum temperature:-25ºC
b) Humidity: Monthly average humidity 95%; Daily average humidity 90% .
c) Altitude above sea level: Maximum installation altitude: 2500m
d) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
e) No frequent violent shake
++++Product feature
Farady JP feeder pillar enclosure was made of 2mm high quality stainless steel plate
after multiple bending flanging process ( flame retardant, environmental protection, heat
insulation, anti-condensation performance), using special stainless steel welding
process, the overall strength after molding, the surface smooth as a mirror, do not leave
weld marks; internal installation of beam (plate) for the hot galvanizing process, to
ensure that the twenty years do not rust; the front and rear doors, easy operation and
maintenance, the door was edged with high elastic aging sealant, each door is equipped
with two types of lock, padlock with anti rain cover wall rust; whole closed with a
sealing device measuring room; the side of the box is equipped with cable lines into the
proof of foreign body wear tube, bottom ventilation holes and the cable outlet hole is
arranged at the top of ventilation and screen, waterproof Anti rust, dustproof, anti
foreign object function, protection grade: lP54.
++++ Main technical specifications
++++Outdoor electrical distribution with advanced technology
Farady low voltage, JP series Feeder Pillars use 304 stainless steel enclosure with IP54
protection degree suitable for outdoor use
++++Cost savings
All weatherproof outdoor enclosures allow the equipment to be located in any outdoor
environment, freeing up valuable indoor floor space whilst retaining remote operation and
control.
There are a wide range of metering instruments available for monitoring the unit locally or
remotely, ensuring efficient operation.
JP series Feeder pillars are available as part of a package substation with transformers
and MV switch or circuit breakers. Additional cost savings are achieved through direct
coupling from the transformer to the JP Feeder pillar eliminating expensive cable runs
++++Safety
CCC certified, providing IP54 operator protection under all circumstances during
operation, allowing electrical systems to be fully co-ordinated minimising electrical faults.
In addition to the overload and short circuit protection, each breaker can be fitted with
earth fault protection.
++++Flexibility
The modular design enables customisation for individual requirements, and has the
flexibility to suit the changing needs of the LV distribution system.
Maximum flexibility is achieved by the four pole busbar system up to 3200A and the
Compact NS range of moulded circuit breakers of ratings up to 630A.
As a complete unit, the JP Feeder Pillar will not only provide circuit protection, but the
outgoing circuits can also be controlled individually via hardwired pilots or linked to the
incoming breaker. Other "add-on" benefits include remote monitoring and status of each
breaker and also remote operation through motor mechanisms.
++++Easy installation
The JP Feeder pillar comes complete and factory assembled for easy installation in any outdoor location with bottom entry cable through individual gland plates. The cable space
is protected by an earthed metal screen, and each breaker is fitted with cable shrouds to
maintain IP2X operator protection when the screen is removed.
Addition of new circuits is made easy, by utilising the cassette on the MCCB breaker
allows the breaker to be positioned anywhere on the busbar system before being clamped,
contributing minimum disruption of supply.
++++instructure
++++Installation size
++++Ordering Instructions
1. Below terms should be marked while ordering:
Incoming and outgoing
With reactive power compensation or not
Protection method(MCCM/ELCB or recloser)
Breaking capacity
++++Packing & Transportation
++++About us
Zhejiang Farady Powertech Co.,Ltd
TEL:0086-0577-61512688
Fax:0086-0577-61510628
Http:// faradypowertech.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}