• Outdoor 33kv Pole Mounted Sectionalizer Load Break Switch
  • Outdoor 33kv Pole Mounted Sectionalizer Load Break Switch
  • Outdoor 33kv Pole Mounted Sectionalizer Load Break Switch

Outdoor 33kv Pole Mounted Sectionalizer Load Break Switch

Type: High-voltage
Certification: VDE
Product Name: Sectionalizer Load Break Switch
Function: Conventional Circuit Breaker
Max. Current: 630A
Max. Voltage: 11kv
Customization:
Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
LW3F
Transport Package
Wooden Case
Trademark
FARADY
Origin
Zhejiang, China
HS Code
8535210000
Production Capacity
200pieces/Mounth

Product Description

General
Pole- mounted load-break switch (Pole-LBS) applies up to 36 kV 400/630 A, 50 Hz Pole-LBSassociated with a State-Of-The-Art Controller, This SF6 gas-insulated switch can corporate with theDistribution Automation $ystem, and also isolate a faulted section of distribution line from the ControlCenter.
A simple pole mounting arrangement contribute to quick and low cost installation, and the switchcan be operated manually with a electronic controller Electronic controller is contained in a stainlesssteel cabinet for an all weather environmental conditions. Remote monitoring and control can also beProvided mounting wire or wireless Modem in a cabinet.
It shall be principal that this SF6 Gas Load Break Switch shall be used in the following servicecondition
Every switch is factory flled, hermetically sealed and production tested according to IEC60265-1(1988) prior to shipment
Main features
1.SF6 gas insulated : SF6 is a electric insulating gas of non-poison and nonflammable, and have a good arc suppression feature.
2.Bushing diversity: Except for standard porcelain bushing, there are also provide various rubber bushing.
3.Visible open circuit and opening and closing situation: It is easy to see the color sign of the main contact place indicator ( green open circuit; red closing). The indicator and main conductor always keep on direct connecting, make sure show the conductor state.
4.Fast operation: Used by spring stored energy operation system., make sure fast switch on and switch off operate ( no more than 1 second)
5.Could provide controller: Stocked by electric controller, could operated in ground or operate by the main controller through RTU screen
6.Solidity switch: Switch was made by solidity and anticorrosion material, make sure have a long useful life (30 years) have the pole equipment feature.
Service condition
1.Air temperature:Maximum temperature: +40ºC; Minimum temperature:-20ºC

2.Humidity:Monthly average humidity 95%; Daily average humidity 90% .

3.Altitude above sea level:Maximum installation altitude: 2500m

4.Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.

5.No frequent violent shake
Technical data
Outdoor 33kv Pole Mounted Sectionalizer Load Break Switch
Detailed Image
Outdoor 33kv Pole Mounted Sectionalizer Load Break Switch
Certification
Outdoor 33kv Pole Mounted Sectionalizer Load Break Switch
Packing & Delivery
Outdoor 33kv Pole Mounted Sectionalizer Load Break Switch
Our company
Outdoor 33kv Pole Mounted Sectionalizer Load Break Switch
Outdoor 33kv Pole Mounted Sectionalizer Load Break Switch
Outdoor 33kv Pole Mounted Sectionalizer Load Break Switch
Outdoor 33kv Pole Mounted Sectionalizer Load Break Switch

Zhejiang Farady Powertech Co.,Ltd
 
 
Http:// faradypowertech.en.made-in-china.com
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory
Registered Capital
7.67 Million USD
Plant Area
3775 square meters