7.2kv Metal Clad Withdrawable Medium Voltage Indoor Switchgear

• Customization: Available
• Certification: ISO9001, IEC
• Voltage Level: Medium Voltage
• Model NO.: KYN
• Product Name: Medium Voltage Indoor Switchgear
• Function: All-Package Unit
• Rated Voltage: 7.2kv
• Rated Current: 630A
• Transport Package: Wooden Case
• Trademark: FARADY
• Origin: Zhejiang, China
• HS Code: 8537109090
• Production Capacity: 200pieces/Mounth

Product Description

General
KYN28 indoor metal-clad withdrawable switchgear(hereinafter short as switchgear)is a complete power distribution device for 3.6~24kV,3-phase AC 50Hz,single-bus and single-bus sectionalized system. It is mainly used for power transmission of middle/small generators in power plants; power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc.,so as to control, protect and monitor the system. The switchgear meets IEC298,GB3906-91.In addition to be used with domestic VS1 vacuum circuit breaker, it can also be used with VD4 from ABB,3AH5 from Siemens domestic ZN65A,and VB2 from GE, etc.,it is truly a power distribution device with good performance.
In order to meet the requirement for wall mounting and front-end maintenance, the switchgear is equipped with a special current transformer, so that the operator can maintain and inspect it in front of the cubicle.
Service condition
1. Air temperature: Maximum temperature: +40ºC; Minimum temperature:-15ºC

2. Humidity: Monthly average humidity 95%; Daily average humidity 90% .

3.Altitude above sea level: Maximum installation altitude: 1000M.

4.Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.

5. No frequent violent shake
Technical data

Detailed image

Notice:

When the rated current is mora than 1600A, cubicle width shall de 1000 mm, and cubicle height will be 1660mm and forschema of rear overhead line in.
1) Width of cabinet :650mm(compound insulation) or 800mm(air insulation) at current< 1250A;
2) Width of cabinet:1000mm at current> 1250A;
3)Depth of cabinet:1400mm, at cabinet width of 650mm(compoud insulation) when employing the configuration of incoming andoutgoing cables;
4)Depth of cabinet :1500mm,at cabinet width of 6800mm(air insulation)when employing the configuration of incoming andoutgoing.cables;
5)Depth of cabinet:1600mm, when employing the configuration of rear overhead incoming and outgoing cables.

 

Certification

Packing & Delivery

Our company
Founded in 1996, with a registered capital of 10 million USD, Zhejiang Farady Electric enjoys about 20 years' experience in MV transmission and distribution electrical equipment manufacture.

We are National Hi-tech enterprise, National Spark plan Program,State Hi-tech enterprise, State Innovation R&D center, Patent demonstrate company.

Farady is located in Liushi of Yueqing, Zhejiang,China,main products include: Transformer/RMU/switchgear/AVR/ACR and MV indoor and outdoor switch. All the products of ours have passed the national and international laboratory type test, Farady Electric was qualified supplier of China State Grid and China southern Grid.

With ISO9001/14001/18001, we are strike for create value for our partner and customer.

There is more than 20 distributors and agents worldwide already trust us and distribute Farady product there, we are not only export product, but also provide whole technology solution to help partner to establish local factory in our business line.

Today, boasting the value of products specialization, brand management, and business globalization, with the sprits of pragmatism, innovation, efficiency, and responsibility, Farady Company is dedicated to become the top name in the international business from china, and contributes its share to the transformation from the Made in China into the Invented in China.



Zhejiang Farady Powertech Co.,Ltd
TEL:[phone]
Fax:[phone]
Http:// faradypowertech.en.made-in-china.com