• 11kv/630A Gas Insulated Outdoor Pole Mounted Load Break Switch

11kv/630A Gas Insulated Outdoor Pole Mounted Load Break Switch

Type: High-voltage
Certification: VDE
Product Name: Outdoor Pole Mounted Load Break Switch
Function: Conventional Circuit Breaker
Max. Current: 630A
Max. Voltage: 11kv
Customization:
Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
LW3F
Transport Package
Wooden Case
Trademark
FARADY
Origin
Zhejiang, China
HS Code
8535210000
Production Capacity
200pieces/Mounth

Product Description

General
Pole- mounted load-break switch (Pole-LBS) applies up to 36 kV 400/630 A, 50 Hz Pole-LBSassociated with a State-Of-The-Art Controller, This SF6 gas-insulated switch can corporate with theDistribution Automation $ystem, and also isolate a faulted section of distribution line from the ControlCenter.
A simple pole mounting arrangement contribute to quick and low cost installation, and the switchcan be operated manually with a electronic controller Electronic controller is contained in a stainlesssteel cabinet for an all weather environmental conditions. Remote monitoring and control can also beProvided mounting wire or wireless Modem in a cabinet.
It shall be principal that this SF6 Gas Load Break Switch shall be used in the following servicecondition
Every switch is factory flled, hermetically sealed and production tested according to IEC60265-1(1988) prior to shipment
Main features
1.SF6 gas insulated : SF6 is a electric insulating gas of non-poison and nonflammable, and have a good arc suppression feature.
2.Bushing diversity: Except for standard porcelain bushing, there are also provide various rubber bushing.
3.Visible open circuit and opening and closing situation: It is easy to see the color sign of the main contact place indicator ( green open circuit; red closing). The indicator and main conductor always keep on direct connecting, make sure show the conductor state.
4.Fast operation: Used by spring stored energy operation system., make sure fast switch on and switch off operate ( no more than 1 second)
5.Could provide controller: Stocked by electric controller, could operated in ground or operate by the main controller through RTU screen
6.Solidity switch: Switch was made by solidity and anticorrosion material, make sure have a long useful life (30 years) have the pole equipment feature.
Service condition
1.Air temperature:Maximum temperature: +40ºC; Minimum temperature:-20ºC

2.Humidity:Monthly average humidity 95%; Daily average humidity 90% .

3.Altitude above sea level:Maximum installation altitude: 2500m

4.Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.

5.No frequent violent shake
Technical data
11kv/630A Gas Insulated Outdoor Pole Mounted Load Break Switch
Detailed Image
11kv/630A Gas Insulated Outdoor Pole Mounted Load Break Switch
Certification
11kv/630A Gas Insulated Outdoor Pole Mounted Load Break Switch
Packing & Delivery
11kv/630A Gas Insulated Outdoor Pole Mounted Load Break Switch
Our company
11kv/630A Gas Insulated Outdoor Pole Mounted Load Break Switch
11kv/630A Gas Insulated Outdoor Pole Mounted Load Break Switch
11kv/630A Gas Insulated Outdoor Pole Mounted Load Break Switch
11kv/630A Gas Insulated Outdoor Pole Mounted Load Break Switch

Zhejiang Farady Powertech Co.,Ltd
 
 
Http:// faradypowertech.en.made-in-china.com
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory
Registered Capital
7.67 Million USD
Plant Area
3775 square meters