35kv/630A Outdoor Pole-Mounted Vacuum Auto Recloser

• Customization: Available
• Breaking Capacity: High Voltage Circuit Breakers
• Operation: Electric Type
• Model NO.: FAR
• Speed: Normal Type Circuit Breaker
• Arc-extinguishing Medium: Vacuum
• Installation: Fixed
• Structure: Recloser
• Poles Number: 3
• Type: Circuit Breaker
• Function: Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection)
• Certification: VDE, ISO9001-2000, Type Tested
• Transport Package: Wooden Case
• Trademark: FARADY
• Origin: Zhejiang, China
• HS Code: 8853521000
• Production Capacity: 20000

Product Description

Overview

FAR 35/630-25 Type Outdoor high voltage vacuum circuit breaker is a outdoor distribution equipment with AC 50HZ,rated voltage 35KV and three-phase ac. It is mainly used for open circuit power distribution network and close the load current, overload current, short circuit current in power system.It is suitable for the transformer substation and factory power distribution system for protection and control use. Especially suitable for urban power grid and rural power grids.

Service Condition

1. Ambient Temperature: -40ºC~+65ºC,daily temperature≤25ºC;
2. Altitude: ≤2000m
3. Wind speed: ≤35m/s
4. Earthquake intensity: ≤8
5. Anti-fouling property: IV level
6. Installation site: Not putting inflammable, explosive, chemical corrosion.

Technical Parameters

NO.	Item		Unit	Numeric
1	Nominal  Voltage		KV	35
2	Rated  Frequency		HZ	50
3	Rated  Current		A	630/1250
4	Rated Short-circuit Breaking Current		KA	20
5	Rated  Stability rated  current		KA	50
6	RMS/Rated the rmal stabilization		KA/S	20/4
7	Mechanism life		Times	10000
8	Rated short-circuit closing breaking Number		Times	30
9	Rated operating sequence			O-0.3s-CO-180s-CO
10	Rated breaking current number		Tmes	10000
11	Rated short-circuit close-open current		KA	50
12	1min Power-frequency withstand	Dry	KV	42/48
		Wet	KV	34
13	Lighting impulse withstand voltage(Peak Value)		KV	75/85
14	Secondary circuit 1min Power-frequency withstand		KV	2

Packaging & Shipping

 

About Us

Founded in 1996, with a registered capital of 10 million USD, Zhejiang Farady Electric enjoys about 20 years' experience in MV transmission and distribution electrical equipment manufacture.
We are National Hi-tech enterprise, National Spark plan Program,State Hi-tech enterprise, State Innovation R&D center, Patent demonstrate company.
Farady is located in Liushi of Yueqing, Zhejiang,China,main products include: Transformer/RMU/switchgear/AVR/ACR and MV indoor and outdoor switch. All the products of ours have passed the national and international laboratory type test, Farady Electric was qualified supplier of China State Grid and China southern Grid.
With ISO9001/14001/18001, we are strike for create value for our partner and customer.
There is more than 20 distributors and agents worldwide already trust us and distribute Farady product there, we are not only export product, but also provide whole technology solution to help partner to establish local factory in our business line.
Today, boasting the value of products specialization, brand management, and business globalization, with the sprits of pragmatism, innovation, efficiency, and responsibility, Farady Company is dedicated to become the top name in the international business from china, and contributes its share to the transformation from the Made in China into the Invented in China.
WE COMMITTED TO PROVIDE A BETTER POWER.


 

Our Advantages

    The traditional way of reactive power compensation is changing the quantity of capacitors to adjust output reactive power, change method is usually switch or contactor, will result in following hazards:
1. The conventional reactive power compensation method has a large compensation capacity and the adjustment is not flexible, it will lead to the compensation is not suitable , often appear over and not enough.
2. The capacitor switching can cause over-voltage and inrush current, and it will seriously affect and reduce the service life of the switch. 
3. When the capacitor is switched on, as the capacitor will charged and discharged, when it need to switch on again, which affects the speed of the switching..
       According to the above problems, our company developed the FLYK type reactive power compensation device, has the following advantages:
(1). Energy conservation: Farady voltage regulating type capacitors will change the output reactive power by regulating voltage on capacitors, so that the reactive power can be adjusted smoothly. Comparing with other method, it can ensure the capacitors in best condition, the energy saving effect is much better 
(2). Low cost:If the old power transformer substation need to reform, only need to add a voltage regulator between the circuit breaker and capacitors, the original circuit breakers, reactors, capacitors can be reuse, greatly reduce the cost of transformation
(3). Maintance Free:When traditional circuit breaker and contactor switching, switching devices and capacitors often damaged because of the above problems, result in high maintenance costs, using Farady devices, automatic control reactive power output, there is no potential risks of other equipments, greatly reducing maintenance and staff costs in power transformer substation 
(4) Quality Assurances
We have a strictly quality control process from the raw material to finished products. Advanced testing lab to make sure products quality and improve our creative ability. Quality and Safety is the soul of our products.
(5) Excellent Services  
Many years of manufacturing experience and rich export business help us to establish a well-trained sales service team for all customers.
(6) Fast Deliveries
Strong manufacture capacity to satisfy urgent leading time. It is around 15-25 working days after we receive the payment. It varies according to the different products and quantity.
(7) OEM ODM and MOQ
Strong R&D team for quick new products' development, we welcome OEM, ODM and customize request order. Whether selecting a current product from our catalog or seeking engineering assistance for your application. You can tell us about your sourcing requirements 
Normally our MOQ is 100pcs per models. We also produce OEM and ODM as you requirement. We are developing worldwide agent.

FAQ

1.Why choice us Farady?
After compare quality,delivery and price you will find out answer
2. Is that possible to be one of distributor of Farady in my country?
Yes,once you action is fast enough 
3,More question......
Feel free to contact you,you will get immediately reply
 

Contact Us