Automatic Link Sectionlizer

• Customization: Available
• Usage: Automotive
• Standard: IEC
• Model NO.: FAS
• Product Name: Automatic Link Sectionlizer
• Function: Protect Distribution System
• Pole: 3poles
• Rated Voltage: 38kv
• Rated Current: 400A
• Transport Package: Wooden Case
• Trademark: FRARDY
• Origin: Zhejiang, China
• HS Code: 8535309000
• Production Capacity: 200pieces/Mounth

Product Description

General
 The electric sectionalizer has been developed for use on overhead distribution lines to improve reliability and service continuity. It enhances the protection of the distribution systemin a simple, economical way which is free from maintenance and spares. Statistics indicate that 70% .90% of fuse cutout operations are in response to transient faults. The electronic sectionalizer enables customers to better manage these types of transient faults, It is designed to substitute a fuse cutout, ensuring effective isolation only in the event of a  93sustained fault, It remains unresponsive to transient faults. The sectionalizer is a selfcontained device, designed to be used in a coordinated overcurrent protection scheme with automatic reclosers.
    This sectionalizer uses micro-computer and operating trip mechanism and does not require external auxiliary supply.And it is designed to withstand the mechanical forces generated by high fault currents. Its design also caters for the durability needed with repetitive hook stick closing in harsh outdoor environments.
    The electronic sectionalizer incorporates electronic logic and trip circuits which are controlled and powered by a dual core current transformer mounted on the copper conductive tube.The current transformer is mounted externally to the conductive tube and encapsulated in a durable weatherproof epoxy.
    The electronic circuit provides the necessary intelligence for counting recloser tripping operations and provokes the opening of the sectionalizer at the appropriate time. The electronic circuit is encapsulated with epoxy, within the environmentally sealed conductive tube. The tube acts as a faraday cage, protecting the electronic circuit from the influence of magnetic fields.
    Tripping is achieved when a solenoid located in the lower half of the conductive tube is energized and the trip arm is released enabling the hinged trunnion to collapse.

Working principle
The current transformer built in the cutout sectionalizer can detect the current of the main circuit and send the output to the electronic control for digital handling. When a fault occurs,the upstream recloser (or circuit breaker) opens, the circuit loses voltage and the current is lower than 300mA, the electronic controller can remember this opening time as a "count" . As it accumulate the presetting number (1 to 4), the sectionalizer will automatic trips within180ms of fault interruption to isolate fault. Then the upstream recloser (or circuitbreaker) closes to restore power supply to the healthy section of the system to limit outage scope and protect the main feeder in service. If the fault is temporary and is cleared before the sectionalizer counter reaches the presetting number, the sectionalizer remains closed and resets to its original state after its reset time expires.

Service condition

1. The ambient air temperature is not above 55ºC or below -40ºC.
2 .The average value of the ambient temperature, measured over a period of 24h,does not exceed 25C.
3 .The altitude does not exceed 1000 m (3300ft).
4 .The wind speed does not exceed 34 m/s (corresponding to 700 Pa on cylindrical surfaces).

5. The ice coating does not exceed 1mm.
6 .The sectionalizer should not apply to those flammable, explosive, corrosive and severe
    vibration conditions. As to other service conditions not covered in the manual, pleasecontact and consult            with the manufacturer for detail information.

Technical data

1.Rated Voltage:15/27/38KV
2.Rated actuating current: 8 to 400A
3.Reclaim time: 20 ± 5%s
4.Operation counts: 1-4
5.Sensitivity of pick up current: ±10%
6.Max. load current prior to operation: 0.3A
7.Min. recloser dead time: 500ms.
8.Min. duration of fault pulse: 10ms.

Detailed image


Certification

Packing & Delivery

About us

Founded in 1996, with a registered capital of 10 million USD, Zhejiang Farady Electric enjoys about 20 years' experience in MV transmission and distribution electrical equipment manufacture.

We are National Hi-tech enterprise, National Spark plan Program,State Hi-tech enterprise, State Innovation R&D center, Patent demonstrate company.

Farady is located in Liushi of Yueqing, Zhejiang,China,main products include: Transformer/RMU/switchgear/AVR/ACR and MV indoor and outdoor switch. All the products of ours have passed the national and international laboratory type test, Farady Electric was qualified supplier of China State Grid and China southern Grid.

With ISO9001/14001/18001, we are strike for create value for our partner and customer.

There is more than 20 distributors and agents worldwide already trust us and distribute Farady product there, we are not only export product, but also provide whole technology solution to help partner to establish local factory in our business line.

Today, boasting the value of products specialization, brand management, and business globalization, with the sprits of pragmatism, innovation, efficiency, and responsibility, Farady Company is dedicated to become the top name in the international business from china, and contributes its share to the transformation from the Made in China into the Invented in China.


Zhejiang Farady Powertech Co.,Ltd
TEL:[phone]
Fax:[phone]
Http:// faradypowertech.en.made-in-china.com