| Customization: | Available |
|---|---|
| Type: | High-voltage |
| Installation: | Outdoor High-voltage |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Pole- mounted load-break switch (Pole-LBS) applies up to 36 kV 400/630 A, 50 Hz Pole-LBSassociated with a State-Of-The-Art Controller, This SF6 gas-insulated switch can corporate with theDistribution Automation $ystem, and also isolate a faulted section of distribution line from the ControlCenter.
A simple pole mounting arrangement contribute to quick and low cost installation, and the switchcan be operated manually with a electronic controller Electronic controller is contained in a stainlesssteel cabinet for an all weather environmental conditions. Remote monitoring and control can also beProvided mounting wire or wireless Modem in a cabinet.
It shall be principal that this SF6 Gas Load Break Switch shall be used in the following service condition
Every switch is factory flled, hermetically sealed and production tested according to IEC60265-1(1988) prior to shipment
1.SF6 gas insulated : SF6 is a electric insulating gas of non-poison and nonflammable, and have a good arc suppression feature.
2.Bushing diversity: Except for standard porcelain bushing, there are also provide various rubber bushing.
3.Visible open circuit and opening and closing situation: It is easy to see the color sign of the main contact place indicator ( green open circuit; red closing). The indicator and main conductor always keep on direct connecting, make sure show the conductor state.
4.Fast operation: Used by spring stored energy operation system., make sure fast switch on and switch off operate ( no more than 1 second)
5.Could provide controller: Stocked by electric controller, could operated in ground or operate by the main controller through RTU screen
6.Solidity switch: Switch was made by solidity and anticorrosion material, make sure have a long useful life (30 years) have the pole equipment feature.
Technical data
Service condition
1.Air temperature:Maximum temperature: +40ºC; Minimum temperature:-20ºC
2.Humidity:Monthly average humidity 95%; Daily average humidity 90% .
3.Altitude above sea level:Maximum installation altitude: 2500m
4.Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
5.No frequent violent shake
Detailed image
Certification
Packing & Delivery
Our company
Zhejiang Farady Powertech Co.,Ltd
Http:// faradypowertech.en.made-in-china.com
){kind=link}