• Mns 0.4kv/1250A 50ka Lt with-Draw Type Switchboard
  • Mns 0.4kv/1250A 50ka Lt with-Draw Type Switchboard

Mns 0.4kv/1250A 50ka Lt with-Draw Type Switchboard

Type: Power
Structure: Fixed Board
Certification: ISO9001:2000, Type Tested
Form: All- packaged Type
Operation Voltage: High Voltage
Size: 1 Uint
Samples:
US$ 1000/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
MNS
Application Range
Power Plants
Shell Material
Stainless Steel
Shell Protection Grade
IP65
Brand
Farady
Transport Package
Wooden Pallets
Specification
375*1500*1665
Trademark
FARADY
Origin
China
HS Code
85371090
Production Capacity
50000

Product Description

General
MNS LV withdrawable switchgear (hereinafter referred to as device) is manufactured by standard module through consulting MNS series low voltage switch cabinet of Switzerland ABB Company, and synthetically improved. The device is applicable to the system with AC 50Hz, rated working voltage 660V and below, used as control device for various power generation, transmission, distribution, power transfer and power consumption device. It is widely used in low voltage distribution system of various mining enterprise, tall building and hotel, municipal construction etc. Besides the general land use, after special disposal, it also can be used for marine petrol drill taken platform and nuclear power station. The device accords with international standard IEC439-1 and national standard GB7251.1.

Characteristics

1. Compact design: Contain more function units with less space.

2. Strong versatility for structure, flexible assembly. C type bar section of 25mm modulus can meet the demands of various structure and type, protection grade and operating environment.

3. Adopt standard module design, can be combined into protection, operation, transfer, control, regulation, measurement, indication etc such standard units. User can choose assembly according to requirement at will. Cabinet structure and drawer unit can be formed with more than 200 components.

4. Fine security: Adopt high strength anti flaming type engineering plastic pack in large quantity to effectively enhance the protective safety performance.

5. High technical performance: Main parameters reach the advanced level at home.

Service environment

1. Ambient air temperature: -5ºC+40ºCand the average temperature should not exceed +35ºC in 24h.

2. Air condition: With clean air. Relative humidity should not exceed 50% at +40ºC. Higher relative humidity is allowed at lower temperature. Ex. 90% at +20ºC. But in view of the temperature change, it is possible that moderate dews will produce casually.

3. Altitude above sea level should not exceed 2000M.

4. The device is suitable to the transportation and store with following temperature:-25ºC ~+55ºC, in short time (within 24h) it reaches +70ºC. Under the limiting temperature, device should not suffer damage that can[1]t recover, and it can works normally under normal conditions.

5. If the above operating conditions not meet user's demand. Consult with manufactory.

6. Technical agreement should be signed additionally if the device is used for marine petrol drill taken platform and nuclear power station.

Structure characteristics

The basic cabinet of device is combined assembly structure. Basic structural pieces of cabinet is zinc plated, connected and firmed into basic bracket through self tapping locking screw or 8.8 grade square corner screw. According to the change demand of project, additionally add corresponding gate, closing board, baffle plate, installation support and the components of bus bar, function units, to assemble a complete set of device. Perform modulus to interior component and compartment size (Modulus unit e=25mm).
 Technology Parameters:
Technology Parameters    
Item Unit Parameters
Rated Working Voltage V 400
Rated Frequency Hz 50/60
Rated Current Horizontal bus line A 1000-6300
Vertical bus line A 1000
Rated short-time tolerant current(1s) kA 100
Rated peak tolerant current kA 220
Dielectric Strength V/1min 2500
Rated Insulation Voltage V AC660
Effective installed height mm 1800
Drawer Specification 400mm Height(16E) mm 250A≤In≤630A
200mm Height(8E) mm 63A≤In≤250A
200/2mm Height(8E/2) mm In≤63A
Control Motor Capacity kW 300
Out shell protection level   IP30/IP40
Shape dimension(Width×Length×Thickness) mm (400-1000)×1000×2200

Mns 0.4kv/1250A 50ka Lt with-Draw Type Switchboard
 

Send your message to this supplier

*From:
*To:
avatar Mr. Zheng
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory
Registered Capital
7.67 Million USD
Plant Area
3775 square meters