11/24/33kv on Load Disconnector Switch

• Customization: Available
• Transport Package: Seaworthy Wooden Case
• Trademark: Farady
• Model NO.: FTS type
• Origin: China (Mainland)
• Production Capacity: 6000 Pieces Per Year

Product Description

General

FTS type Outdoor on load break switch (switch disconnector) contained in this list are destined to switch stub lines

and ring main lines or transformers( It can be equipped with MV HRC fuse links as short circuit protection function) or for switching under on load conditions. FTS type switch comply with IEC/IEEE and DVE-recommendation standards. Especially comply with DIN VDE 0670 part 3 and IEC publication IEC-60265, IEC-129.

 

Service environment

 

    a) Air temperature: Maximum temperature: +75ºC; Minimum temperature:-45ºC

    b)Humidity: Monthly average humidity 95%; Daily average humidity 90% .

    c)Altitude above sea level: Maximum installation altitude: 2500m

    d) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.

    e) No frequent violent shake

Features
1. Compact design All steel FTS either in stainless steel or hot-dip galvanized

2.Solid and stable base frame

3. Main contact with icing protection

4. Insulators available in porcelain or alternatively in silicone

5.Minimal sag for the line-connection thanks to the two fixed terminals

6.Completely maintenance antirust AL alloy -Arc chamber

7.Switching-off procedure without external arc

8.Short circuit making capacity under specific conditions possible

9.Fixing on the supporting structure either by clamping (free setting) or screwing  (holes in the base frame)

11.Easy on-site installation and setting

12.High reliability: up to 1'000 cycles (depending on the making current)

13. All conducting FTS either silver, nickel or tin-plated

14. Practically maintenance-free

Specifications


 

Dimension


Odering instructions

1. Belowing terms should be marked while ordering: 
Model number, product name and quantity. 
Model of operating mechanism ( A,K ). 
Provide the rated voltage specification if motorization operating is required. 
For load break switch + fuse combination, fuse model and specification is required. 
Other special requirements. 
2. Documents with product from manufacturer: 
Certificate of qualification. 
Testing report for products. 
Packing list. 
Other technical documents.

Packing & Delivery



About us